Product Description

JENUINcable is a Chinese wire and cable manufacturers with more than 20 years of experience in designing, manufacturing, and selling green environmental–protective wires and cables.we provide xlpe cable,pvc insulated cable,pvc sheathed cable,lszh cable and so on.

 

Fire resistant control cable , the cable refers as multiple cores Cu. The function of mica is to prevent burning when cables catching fire. The cable can maintain the integrity of the electric circuit and continue to work for a period of time when exposed to fire. The sheath is compound material LSFH low smoking free holagen which has little smoking and no toxic gas emission which reduces the damage to the people and equipment. These fire rated control cables we supplied are twisted two layers of mica tape with 80% overlap rate which achieves a good performance of fire resistance.

 

Fire Resistant Control Cable (2-4cores) 300-500V Parameter

 

Conductor				rated voltage 300/500v
				Without Earth Conductor		With Earth Conductor
No. of Core X Cross Section	No./Nominal Diameter of Strands	Nominal Insulation Thickness	Nominal Sheath Thickness	Nominal Overall Diameter	Approx. Weight	Nominal Overall Diameter	Approx. Weight
No*mm²	No./mm	mm	mm	mm	kg/km	mm	kg/km
2 Cores
2x1.5	7/0.53	0.5	0.5	7.7	70	8.2	80
2x2.5	7/0.67	0.5	0.5	8.8	100	9.6	120
2x4	7/0.85	0.5	0.5	9.8	140	10.5	170
3 Cores
3x1.5	7/0.53	0.5	0.5	8.7	90	10.5	100
3x2.5	7/0.67	0.5	0.5	9.5	125	10.7	150
3x4	7/0.85	0.5	0.5	11.5	180	12.5	220
4 Cores
4x1.5	7/0.53	0.5	0.5	10.3	105	12.2	120
4x2.5	7/0.67	0.5	0.5	11	155	13	190
4x4	7/0.85	0.5	0.5	12.5	255	13.5	270

 

Description of Fire Resistant Control Cable (2-4cores) 300-500V

 

Rated voltage: 300/500V

 

Basic standard: BS 7211

 

Conductor: bare annealed copper wire, stranded wire to IEC(EN) 60228  class 2

 

Fire lyer: Mica glass tape

 

Insulation: PVC (XLPE)

 

Sheath: LSZH compound to BS 7655-6.1  

 

Operating temperature range (fixed state): -30°C – +90°C

 

Operating temperature range (mobile state): -20°C – +50°C

 

Min bending radius: 6 times of Overall Diameter

 

Insulation resistance:  20 MΩ x km (at 20°C)

 

Short circuit temperature:  250°C

 

Circuit Integrity	IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180);
	CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3);
	NF C32-070-2.3(CR1)
Flame Retardance (Single Vertical Wire Test)	EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2;
	VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2);
	CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation (Vertically-mounted bundled wires	EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-
	004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free	IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1;
	CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission	IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2;
	CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission	IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2;
	CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
No Toxic gases	NES 02-713; NF C 20-454

 

Application Of Fire Resistant Control Cable (2-4cores) 300-500V

 

The cables are designed for facilities where keeping and maintaining integrity of the electrical circuit is critical in power supply system.

 

The cables are widely used in underground tunnels, emergency lightings, fire alarm systems, control and power circuits, power stations, lifts, escalators, and high-rise buildings.